Dimension Check
To ensure the dimensional accuracy of OD, ID, Thickness, Length, Ovality etc.
Surface Check
To ensure that finished tubes are free from scale, pit marks rupture I.D. & O.D scores, roll marks, dent etc
Chemical Test
We use Spectrometer & PMI Machine test the chemical composition and quality parameters of raw materials& the finished product.
Mechanical Tests
Hardness Test
To test the hardness of the tubes.
Tensile Test
To check the tensile strength of the tubes.
Flaring Test
To check the ductility of material. End of tubes should be flared successfully without developing crack
Flattening Test
The test piece is determined acceptable if it stands the extreme specifed compression stress without cracking.
Flange Test
The photo besides shows a test piece subjected to Flange Test as per standard.
Bend Test
Pipes are bent at 90° to detect if any cracks are developed
Non Destructive Test
Hydro Test
100% Hydrostatic testing is carried carried outt too checkeck any leakage through out the tube.
Eddy Current Test
To detect subsurface in homogeneities from inside & outside of tubes
Ultrasonic Test
For detection of subsurface flaws and imperfections.
Air Under Water (Pneumatic)
This test is carried out to determine leakage in the tube.
Roughness Test
Roughness testing is carried Rougnness testing is ca out to check surface texture irregularities of the tubes and pipes
Boroscope Test
Boroscope testing ais a visual inspection carried out to detect narrow and minor surface defects on I.D of the tubes and pipes.